FileMgr

✏️ /opt/netdata/usr/libexec/netdata/charts.d/libreswan.chart.sh

✕ Tutup

# no need for shebang - this file is loaded from charts.d.plugin
# SPDX-License-Identifier: GPL-3.0-or-later
# shellcheck shell=bash disable=SC1117
#
# _update_every is a special variable - it holds the number of seconds
# between the calls of the _update() function
libreswan_update_every=1

# the priority is used to sort the charts on the dashboard
# 1 = the first chart
libreswan_priority=90000

# set to 1, to run ipsec with sudo
libreswan_sudo=1

# global variables to store our collected data

# [TUNNELID] = TUNNELNAME
# here we track the *latest* established tunnels
# as detected by: ipsec whack --status
declare -A libreswan_connected_tunnels=()

# [TUNNELID] = VALUE
# here we track values of all established tunnels (not only the latest)
# as detected by: ipsec whack --trafficstatus
declare -A libreswan_traffic_in=()
declare -A libreswan_traffic_out=()
declare -A libreswan_established_add_time=()

# [TUNNELNAME] = CHARTID
# here we remember CHARTIDs of all tunnels
# we need this to avoid converting tunnel names to chart IDs on every iteration
declare -A libreswan_tunnel_charts=()

is_able_sudo_ipsec() {
  if ! sudo -n -l "${IPSEC_CMD}" whack --status > /dev/null 2>&1; then
    return 1
  fi
  if ! sudo -n -l "${IPSEC_CMD}" whack --trafficstatus > /dev/null 2>&1; then
    return 1
  fi
  return 0
}

# run the ipsec command
libreswan_ipsec() {
  if [ ${libreswan_sudo} -ne 0 ]; then
    sudo -n "${IPSEC_CMD}" "${@}"
    return $?
  else
    "${IPSEC_CMD}" "${@}"
    return $?
  fi
}

# fetch latest values - fill the arrays
libreswan_get() {
  # do all the work to collect / calculate the values
  # for each dimension

# empty the variables
  libreswan_traffic_in=()
  libreswan_traffic_out=()
  libreswan_established_add_time=()
  libreswan_connected_tunnels=()

# convert the ipsec command output to a shell script
  # and source it to get the values
  # shellcheck disable=SC1090
  source <(
    {
      libreswan_ipsec whack --status
      libreswan_ipsec whack --trafficstatus
    } | sed -n \
      -e "s|[0-9]\+ #$[0-9]\+$: \"$.*$\".*IPsec SA established.*newest IPSEC.*|libreswan_connected_tunnels[\"\1\"]=\"\2\"|p" \
      -e "s|[0-9]\+ #$[0-9]\+$: \"$.*$\",\{0,1\}.* add_time=$[0-9]\+$,.* inBytes=$[0-9]\+$,.* outBytes=$[0-9]\+$.*|libreswan_traffic_in[\"\1\"]=\"\4\"; libreswan_traffic_out[\"\1\"]=\"\5\"; libreswan_established_add_time[\"\1\"]=\"\3\";|p"
  ) || return 1

# check we got some data
  [ ${#libreswan_connected_tunnels[@]} -eq 0 ] && return 1

return 0
}

# _check is called once, to find out if this chart should be enabled or not
libreswan_check() {
  # this should return:
  #  - 0 to enable the chart
  #  - 1 to disable the chart

require_cmd ipsec || return 1

# make sure it is libreswan
  # shellcheck disable=SC2143
  if [ -z "$(ipsec --version | grep -i libreswan)" ]; then
    error "ipsec command is not Libreswan. Disabling Libreswan plugin."
    return 1
  fi

if [ ${libreswan_sudo} -ne 0 ] && ! is_able_sudo_ipsec; then
    error "not enough permissions to execute ipsec with sudo. Disabling Libreswan plugin."
    return 1
  fi

# check that we can collect data
  libreswan_get || return 1

return 0
}

# create the charts for an ipsec tunnel
libreswan_create_one() {
  local n="${1}" name

name="${libreswan_connected_tunnels[${n}]}"

[ -n "${libreswan_tunnel_charts[${name}]}" ] && return 0

libreswan_tunnel_charts[${name}]="$(fixid "${name}")"

cat << EOF
CHART libreswan.${libreswan_tunnel_charts[${name}]}_net '${name}_net' "LibreSWAN Tunnel ${name} Traffic" "kilobits/s" "${name}" libreswan.net area $((libreswan_priority)) $libreswan_update_every '' '' 'libreswan'
DIMENSION in '' incremental 8 1000
DIMENSION out '' incremental -8 1000
CHART libreswan.${libreswan_tunnel_charts[${name}]}_uptime '${name}_uptime' "LibreSWAN Tunnel ${name} Uptime" "seconds" "${name}" libreswan.uptime line $((libreswan_priority + 1)) $libreswan_update_every '' '' 'libreswan'
DIMENSION uptime '' absolute 1 1
EOF

return 0

}

# _create is called once, to create the charts
libreswan_create() {
  local n
  for n in "${!libreswan_connected_tunnels[@]}"; do
    libreswan_create_one "${n}"
  done
  return 0
}

libreswan_now=$(date +%s)

# send the values to netdata for an ipsec tunnel
libreswan_update_one() {
  local n="${1}" microseconds="${2}" name id uptime

name="${libreswan_connected_tunnels[${n}]}"
  id="${libreswan_tunnel_charts[${name}]}"

[ -z "${id}" ] && libreswan_create_one "${name}"

uptime=$((libreswan_now - libreswan_established_add_time[${n}]))
  [ ${uptime} -lt 0 ] && uptime=0

# write the result of the work.
  cat << VALUESEOF
BEGIN libreswan.${id}_net ${microseconds}
SET in = ${libreswan_traffic_in[${n}]}
SET out = ${libreswan_traffic_out[${n}]}
END
BEGIN libreswan.${id}_uptime ${microseconds}
SET uptime = ${uptime}
END
VALUESEOF
}

# _update is called continuously, to collect the values
libreswan_update() {
  # the first argument to this function is the microseconds since last update
  # pass this parameter to the BEGIN statement (see below).

libreswan_get || return 1
  libreswan_now=$(date +%s)

local n
  for n in "${!libreswan_connected_tunnels[@]}"; do
    libreswan_update_one "${n}" "${@}"
  done

return 0
}

Batal

⬅ netdata 3 item

Nama	Tipe	Ukuran	Diubah	Perm	Aksi
⚙️ example.chart.sh	sh	3.6 KB	11/07/26 07:33	0755	✏️ ⬇
⚙️ libreswan.chart.sh	sh	5.1 KB	11/07/26 07:33	0755	✏️ ⬇
⚙️ opensips.chart.sh	sh	13.4 KB	11/07/26 07:33	0755	✏️ ⬇

✏️ Rename

🔑 Ubah Permission