FileMgr

✏️ /opt/cpanel/ea-wappspector/vendor/slevomat/coding-standard/doc/classes.md

✕ Tutup

## Classes

#### SlevomatCodingStandard.Classes.BackedEnumTypeSpacing 🔧

* Checks number of spaces before `:` and before type.

Sniff provides the following settings:

* `spacesCountBeforeColon`: the number of spaces before `:`.
* `spacesCountBeforeType`: the number of spaces before type.

#### SlevomatCodingStandard.Classes.ClassConstantVisibility 🔧

In PHP 7.1+ it's possible to declare [visibility of class constants](https://wiki.php.net/rfc/class_const_visibility). In a similar vein to optional declaration of visibility for properties and methods which is actually required in sane coding standards, this sniff also requires declaring visibility for all class constants.

Sniff provides the following settings:

* `fixable`: the sniff is not fixable by default because we think it's better to decide about each constant one by one, however you can enable fixability with this option.

```php
const FOO = 1; // visibility missing!
public const BAR = 2; // correct
```

#### SlevomatCodingStandard.Classes.ClassLength

Disallows long classes. This sniff provides the following settings:

* `includeComments` (default: `false`): should comments be included in the count.
* `includeWhitespace` (default: `false`): should empty lines be included in the count.
* `maxLinesLength` (default: `250`): specifies max allowed function lines length.

#### SlevomatCodingStandard.Classes.ClassMemberSpacing 🔧

Sniff checks lines count between different class members, e.g. between last property and first method.

Sniff provides the following settings:

* `linesCountBetweenMembers`: lines count between different class members

#### SlevomatCodingStandard.Classes.ClassStructure 🔧

Checks that class/trait/interface members are in the correct order.

Sniff provides the following settings:

* `groups`: order of groups. Use multiple groups in one `<element value="">` to not differentiate among them. You can use specific groups or shortcuts.
* `methodGroups`: custom method groups. Define a custom group for special methods based on their name, annotation, or attribute.

**List of supported groups**:
uses,
enum cases,
public constants, protected constants, private constants,
public properties, public static properties, protected properties, protected static properties, private properties, private static properties,
constructor, static constructors, destructor, magic methods, invoke method,
public methods, protected methods, private methods,
public final methods, public static final methods, protected final methods, protected static final methods,
public abstract methods, public static abstract methods, protected abstract methods, protected static abstract methods,
public static methods, protected static methods, private static methods

**List of supported shortcuts**:
constants, properties, static properties, methods, all public methods, all protected methods, all private methods, static methods, final methods, abstract methods

```xml
<rule ref="SlevomatCodingStandard.Classes.ClassStructure">
	<properties>
		<property name="methodGroups" type="array">
			<element key="inject method" value="inject"/>
			<element key="inject methods" value="inject*"/>
			<element key="phpunit before" value="setUp, @before, #PHPUnit\Framework\Attributes\Before"/>
		</property>

<element value="public constants"/>
			<element value="constants"/>

<element value="public properties, protected properties, private properties"/>

<element value="constructor"/>

<element value="inject method"/>
			<element value="inject methods"/>

<element value="phpunit before"/>

<element value="all public methods"/>
			<element value="methods"/>

<element value="magic methods"/>
		</property>
	</properties>
</rule>
```

#### SlevomatCodingStandard.Classes.ConstantSpacing 🔧

Checks that there is a certain number of blank lines between constants.

Sniff provides the following settings:

* `minLinesCountBeforeWithComment`: minimum number of lines before constant with a documentation comment or attribute
* `maxLinesCountBeforeWithComment`: maximum number of lines before constant with a documentation comment or attribute
* `minLinesCountBeforeWithoutComment`: minimum number of lines before constant without a documentation comment or attribute
* `maxLinesCountBeforeWithoutComment`: maximum number of lines before constant without a documentation comment or attribute
* `minLinesCountBeforeMultiline` (default: `null`): minimum number of lines before multiline constant
* `maxLinesCountBeforeMultiline` (default: `null`): maximum number of lines before multiline constant

#### SlevomatCodingStandard.Classes.DisallowConstructorPropertyPromotion

Disallows usage of constructor property promotion.

#### SlevomatCodingStandard.Classes.DisallowLateStaticBindingForConstants 🔧

Disallows late static binding for constants.

#### SlevomatCodingStandard.Classes.DisallowMultiConstantDefinition 🔧

Disallows multi constant definition.

#### SlevomatCodingStandard.Classes.DisallowMultiPropertyDefinition 🔧

Disallows multi property definition.

#### SlevomatCodingStandard.Classes.DisallowStringExpressionPropertyFetch 🔧

Disallows string expression property fetch `$object->{'foo'}` when the property name is compatible with identifier access.

#### SlevomatCodingStandard.Classes.EmptyLinesAroundClassBraces 🔧

Enforces one configurable number of lines after opening class/interface/trait brace and one empty line before the closing brace.

Sniff provides the following settings:

* `linesCountAfterOpeningBrace`: allows to configure the number of lines after opening brace.
* `linesCountBeforeClosingBrace`: allows to configure the number of lines before closing brace.

#### SlevomatCodingStandard.Classes.EnumCaseSpacing 🔧

Checks that there is a certain number of blank lines between enum cases.

Sniff provides the following settings:

* `minLinesCountBeforeWithComment`: minimum number of lines before enum case with a documentation comment or attribute
* `maxLinesCountBeforeWithComment`: maximum number of lines before enum case with a documentation comment or attribute
* `minLinesCountBeforeWithoutComment`: minimum number of lines before enum case without a documentation comment or attribute
* `maxLinesCountBeforeWithoutComment`: maximum number of lines before enum case without a documentation comment or attribute

#### SlevomatCodingStandard.Classes.ForbiddenPublicProperty

Disallows using public properties.

This sniff provides the following setting:

* `checkPromoted` (default: `false`): will check promoted properties too.
* `allowReadonly` (default: `false`): will allow readonly properties.
* `allowNonPublicSet` (default: `true`): will allow properties with `protected(set)` or `private(set)`.

#### SlevomatCodingStandard.Classes.MethodSpacing 🔧

Checks that there is a certain number of blank lines between methods.

Sniff provides the following settings:

* `minLinesCount`: minimum number of blank lines
* `maxLinesCount`: maximum number of blank lines

#### SlevomatCodingStandard.Classes.ModernClassNameReference 🔧

Reports use of `__CLASS__`, `get_parent_class()`, `get_called_class()`, `get_class()` and `get_class($this)`.
Class names should be referenced via `::class` constant when possible.

Sniff provides the following settings:

* `enableOnObjects`: Enable `::class` on all objects. It's on by default if you're on PHP 8.0+

#### SlevomatCodingStandard.Classes.ParentCallSpacing 🔧

Enforces configurable number of lines around parent method call.

Sniff provides the following settings:

* `linesCountBefore`: allows to configure the number of lines before parent call.
* `linesCountBeforeFirst`: allows to configure the number of lines before first parent call.
* `linesCountAfter`: allows to configure the number of lines after parent call.
* `linesCountAfterLast`: allows to configure the number of lines after last parent call.

#### SlevomatCodingStandard.Classes.PropertyDeclaration 🔧

* Checks that there's a single space between a typehint and a property name: `Foo $foo`
* Checks that there's no whitespace between a nullability symbol and a typehint: `?Foo`
* Checks that there's a single space before nullability symbol or a typehint: `private ?Foo` or `private Foo`
* Checks order of modifiers

Sniff provides the following settings:

* `modifiersOrder`: allows to configure order of modifiers.
* `checkPromoted`: will check promoted properties too.
* `enableMultipleSpacesBetweenModifiersCheck`: checks multiple spaces between modifiers.

#### SlevomatCodingStandard.Classes.PropertySpacing 🔧

Checks that there is a certain number of blank lines between properties.

Sniff provides the following settings:

* `minLinesCountBeforeWithComment`: minimum number of lines before property with a documentation comment or attribute
* `maxLinesCountBeforeWithComment`: maximum number of lines before property with a documentation comment or attribute
* `minLinesCountBeforeWithoutComment`: minimum number of lines before property without a documentation comment or attribute
* `maxLinesCountBeforeWithoutComment`: maximum number of lines before property without a documentation comment or attribute
* `minLinesCountBeforeMultiline` (default: `null`): minimum number of lines before multiline property
* `maxLinesCountBeforeMultiline` (default: `null`): maximum number of lines before multiline property

#### SlevomatCodingStandard.Classes.RequireAbstractOrFinal 🔧

Requires the class to be declared either as abstract or as final.

#### SlevomatCodingStandard.Classes.RequireConstructorPropertyPromotion 🔧

Requires use of constructor property promotion.

This sniff provides the following setting:

* `enable`: either to enable or not this sniff. By default, it is enabled for PHP versions 8.0 or higher.

#### SlevomatCodingStandard.Classes.RequireMultiLineMethodSignature 🔧

Enforces method signature to be split to more lines so each parameter is on its own line.

Sniff provides the following settings:

* `minLineLength`: specifies min line length to enforce signature to be split. Use 0 value to enforce for all methods, regardless of length.
* `minParametersCount`: specifies min parameters count to enforce signature to be split.

* `includedMethodPatterns`: allows to configure which methods are included in sniff detection. This is an array of regular expressions (PCRE) with delimiters. You should not use this with `excludedMethodPatterns`, as it will not work properly.

* `excludedMethodPatterns`: allows to configure which methods are excluded from sniff detection. This is an array of regular expressions (PCRE) with delimiters. You should not use this with `includedMethodPatterns`, as it will not work properly.

* `withPromotedProperties`: always require multiline signatures for methods with promoted properties.

#### SlevomatCodingStandard.Classes.RequireSelfReference 🔧

Requires `self` for local reference.

#### SlevomatCodingStandard.Classes.RequireSingleLineMethodSignature 🔧

Enforces method signature to be on a single line.

Sniff provides the following settings:

* `maxLineLength`: specifies max allowed line length. If signature fit on it, it's enforced. Use 0 value to enforce for all methods, regardless of length.

#### SlevomatCodingStandard.Classes.SuperfluousAbstractClassNaming

Reports use of superfluous prefix or suffix "Abstract" for abstract classes.

#### SlevomatCodingStandard.Classes.SuperfluousInterfaceNaming

Reports use of superfluous prefix or suffix "Interface" for interfaces.

#### SlevomatCodingStandard.Classes.SuperfluousExceptionNaming

Reports use of superfluous suffix "Exception" for exceptions.

#### SlevomatCodingStandard.Classes.SuperfluousErrorNaming

Reports use of superfluous suffix "Error" for errors.

#### SlevomatCodingStandard.Classes.SuperfluousTraitNaming

Reports use of superfluous suffix "Trait" for traits.

#### SlevomatCodingStandard.Classes.TraitUseDeclaration 🔧

Prohibits multiple traits separated by commas in one `use` statement.

#### SlevomatCodingStandard.Classes.TraitUseSpacing 🔧

Enforces configurable number of lines before first `use`, after last `use` and between two `use` statements.

Sniff provides the following settings:

* `linesCountBeforeFirstUse`: allows to configure the number of lines before first `use`.
* `linesCountBeforeFirstUseWhenFirstInClass`: allows to configure the number of lines before first `use` when the `use` is the first statement in the class.
* `linesCountBetweenUses`: allows to configure the number of lines between two `use` statements.
* `linesCountAfterLastUse`: allows to configure the number of lines after last `use`.
* `linesCountAfterLastUseWhenLastInClass`: allows to configure the number of lines after last `use` when the `use` is the last statement in the class.

#### SlevomatCodingStandard.Classes.UselessLateStaticBinding 🔧

Reports useless late static binding.

Batal

⬅ coding-standard 17 item

Nama	Tipe	Ukuran	Diubah	Perm	Aksi
📝 arrays.md	md	1.6 KB	13/09/25 15:53	0644	✏️ ⬇
📝 attributes.md	md	1.8 KB	13/09/25 15:53	0644	✏️ ⬇
📝 classes.md	md	13.8 KB	13/09/25 15:53	0644	✏️ ⬇
📝 commenting.md	md	5.7 KB	13/09/25 15:53	0644	✏️ ⬇
📝 complexity.md	md	288 B	13/09/25 15:53	0644	✏️ ⬇
📝 control-structures.md	md	9.3 KB	13/09/25 15:53	0644	✏️ ⬇
📝 exceptions.md	md	1.1 KB	13/09/25 15:53	0644	✏️ ⬇
📝 files.md	md	2.5 KB	13/09/25 15:53	0644	✏️ ⬇
📝 functions.md	md	5.2 KB	13/09/25 15:53	0644	✏️ ⬇
📝 namespaces.md	md	7.8 KB	13/09/25 15:53	0644	✏️ ⬇
📝 numbers.md	md	625 B	13/09/25 15:53	0644	✏️ ⬇
📝 operators.md	md	1.1 KB	13/09/25 15:53	0644	✏️ ⬇
📝 php.md	md	3.1 KB	13/09/25 15:53	0644	✏️ ⬇
📝 strings.md	md	392 B	13/09/25 15:53	0644	✏️ ⬇
📝 type-hints.md	md	10.7 KB	13/09/25 15:53	0644	✏️ ⬇
📝 variables.md	md	749 B	13/09/25 15:53	0644	✏️ ⬇
📝 whitespaces.md	md	623 B	13/09/25 15:53	0644	✏️ ⬇

✏️ Rename

🔑 Ubah Permission