FileMgr

✏️ /opt/alt/php54/usr/share/pear/ezc/Archive/tar/v7.php

✕ Tutup

<?php
/**
 * File contains the ezcArchiveV7Tar class.
 *
 * @package Archive
 * @version 1.4.1
 * @copyright Copyright (C) 2005-2010 eZ Systems AS. All rights reserved.
 * @license http://ez.no/licenses/new_bsd New BSD License
 */

/**
 * The ezcArchiveV7Tar class implements the Tar v7 archive format.
 *
 * ezcArchiveV7Tar is a subclass from {@link ezcArchive} that provides the common interface.
 * Tar v7 algorithm specific methods are implemented in this class.
 *
 * ezcArchiveV7Tar reads on creation only the first {@link ezcArchiveEntry} from the archive.
 * When needed next entries are read.
 *
 * The V7 Tar algorithm is most basic implementation of Tar. This format has the following characteristics:
 * - Filenames up to 100 characters.
 * - Stores the file permissions.
 * - Stores the owner and group by ID.
 * - Stores the last modification time.
 * - Can archive: regular files and symbolic links.
 * - Maximum file size: 8 Gygabyte.
 *
 * @package Archive
 * @version 1.4.1
 */
class ezcArchiveV7Tar extends ezcArchive
{
    /**
     * Amount of bytes in a block.
     */
    const BLOCK_SIZE = 512;

/**
     * Tar archives have always $blockFactor of blocks.
     *
     * @var int
     */
    protected $blockFactor = 20;

/**
     * Stores all the headers from the archive.
     *
     * The first header of the archive has index zero. The ezcArchiveV7Header or a subclass from this header
     * is stored in the array. {@link createTarHeader()} will create the correct header.
     *
     * @var array(ezcArchiveV7Header)
     */
    protected $headers;

/**
     * Stores the block number where the header starts.
     *
     * The fileNumber is the index of the array.
     *
     * @var array(int)
     */
    protected $headerPositions;

/**
     * Specifies if the archive contains null blocks.
     *
     * @var bool
     */
    protected $hasNullBlocks;

/**
     * Stores the number of added blocks.
     *
     * @var int
     */
    protected $addedBlocks = 0;

/**
     * Specifies if unreliable blocks were added.
     *
     * @var bool
     */
    protected $addedBlocksNotReliable = false;

/**
     * Initializes the Tar and tries to read the first entry from the archive.
     *
     * At initialization it sets the blockFactor to $blockFactor. Each tar archive
     * has always $blockFactor of blocks ( 0, $blockFactor, 2 * $blockFactor, etc ).
     *
     * The Tar archive works with blocks, so therefore the first parameter expects
     * the archive as a blockFile.
     *
     * @param ezcArchiveBlockFile $file
     * @param int $blockFactor
     */
    public function __construct( ezcArchiveBlockFile $file, $blockFactor = 20 )
    {
        $this->blockFactor = $blockFactor;
        $this->file = $file;

$this->headers = array();
        $this->headerPositions = array();

$this->entriesRead = 0;
        $this->fileNumber = 0;

$this->hasNullBlocks = $this->file->isNew() ? false : true;
        $this->addedBlocks = 0;

if ( $this->file->getFileAccess() !== ezcArchiveFile::WRITE_ONLY )
        {
            $this->readCurrentFromArchive();
        }
    }

/**
     * Closes the archive.
     */
    public function __destruct()
    {
        $this->close();
    }

/**
     * Returns the value which specifies a TAR_V7 algorithm.
     *
     * @return int
     */
    public function getAlgorithm()
    {
        return self::TAR_V7;
    }

/**
     * Returns true because the TAR_V7 algorithm can write.
     *
     * @see isWritable()
     *
     * @return bool
     */
    public function algorithmCanWrite()
    {
        return true;
    }

/**
     * Creates the a new tar header for this class.
     *
     * Usually this class is reimplemented by other Tar algorithms, and therefore it returns another Tar
     * header.
     *
     * This method expects an {@link ezcArchiveBlockFile} that points to the header that should be
     * read (and created). If null is given as  block file, an empty header will be created.
     *
     * @param string|null $file
     * @return ezcArchiveV7Header  The ezcArchiveV7Header or a subclass is returned.
     */
    protected function createTarHeader( $file = null )
    {
        return new ezcArchiveV7Header( $file );
    }

/**
     * Read the current entry from the archive.
     *
     * The current entry from the archive is read, if possible. This method will set the {@link $completed}
     * to true, if the end of the archive is reached. The {@link $entriesRead} will be increased, if the
     * entry is correctly read.
     *
     * @throws ezcArchiveBlockSizeException
     *         if the file is empty
     *         or if the file is not valid
     * @return bool
     */
    protected function readCurrentFromArchive()
    {
        // Not cached, read the next block.
        if ( $this->entriesRead == 0 )
        {
            $this->file->rewind();
            if ( !$this->file->isEmpty() && !$this->file->valid() )
            {
                throw new ezcArchiveBlockSizeException( $this->file->getFileName(),  "At least one block expected in tar archive" );
            }
        }
        else
        {
            // Search the new block.
            $newBlock = $this->headerPositions[ $this->fileNumber - 1 ] +  $this->file->getBlocksFromBytes( $this->headers[ $this->fileNumber - 1 ]->fileSize );

// Search for that block.
            if ( $newBlock != $this->file->key() )
            {
                $this->file->seek( $newBlock );
            }

// Read the new block.
            $this->file->next();
        }

// This might be a null block.
        if ( !$this->file->valid() || $this->file->isNullBlock() )
        {
            $this->completed = true;
            return false;
        }

$this->headers[ $this->fileNumber ] = $this->createTarHeader( $this->file );
        $this->headerPositions[ $this->fileNumber ] = $this->file->key();

// Set the currentEntry information.
        $struct = new ezcArchiveFileStructure();
        $this->headers[ $this->fileNumber ]->setArchiveFileStructure( $struct );
        $this->entries[ $this->fileNumber ] = new ezcArchiveEntry( $struct );

$this->entriesRead++;

return true;
    }

/**
     * Writes the file data from the current entry to the given file.
     *
     * @param string $targetPath  The absolute or relative path of the target file.
     * @return bool
     */
    protected function writeCurrentDataToFile( $targetPath )
    {
        if ( !$this->valid() )
        {
            return false;
        }

$requestedBlock = $this->headerPositions[$this->fileNumber];
        $currentBlock = $this->file->key();
        if ( $currentBlock != $requestedBlock )
        {
            $this->file->seek( $requestedBlock );
        }

$header = $this->headers[ $this->fileNumber ];

if ( $header->fileSize > 0 )
        {
            $completeBlocks = ( int ) ( $header->fileSize / self::BLOCK_SIZE );
            $rest = ( $header->fileSize % self::BLOCK_SIZE );

//  Write to file
            $fp = fopen( $targetPath, "w" );

for ( $i = 0; $i < $completeBlocks; $i++ )
            {
                fwrite( $fp, $this->file->next() );
            }

fwrite( $fp, $this->file->next(), $rest );
            fclose( $fp );
         }
         else
         {
             touch( $targetPath );
         }

return true;
    }

/**
     * Truncates the archive to $fileNumber of files.
     *
     * The $fileNumber parameter specifies the amount of files that should remain.
     * If the default value, zero, is used then the entire archive file is cleared.
     *
     * @throws ezcArchiveException
     *         if the archive is closed
     * @throws ezcBaseFilePermissionException
     *         if the file is read-only
     *         or if the current algorithm cannot write
     * @param int $fileNumber
     * @return bool
     */
    public function truncate( $fileNumber = 0 )
    {
        if ( $this->file === null )
        {
            throw new ezcArchiveException( "The archive is closed" );
        }

if ( $this->file->getFileAccess() === ezcArchiveFile::READ_ONLY || !$this->algorithmCanWrite() )
        {
            throw new ezcBaseFilePermissionException( $this->file->getFileName(), ezcBaseFilePermissionException::WRITE, "Archive is read-only" );
        }

$originalFileNumber = $this->fileNumber;
        $this->hasNullBlocks = false;
        $this->addedBlocksNotReliable = true;

// Entirely empty the file.
        if ( $fileNumber == 0 )
        {
            $this->file->truncate();

$this->entriesRead = 0;
            $this->fileNumber = 0;
            $this->completed = true;
        }
        else
        {
            $this->seek( $fileNumber ); // read the headers.
            $endBlockNumber = $this->headerPositions[ $fileNumber - 1 ] +  $this->file->getBlocksFromBytes( $this->headers[ $fileNumber - 1 ]->fileSize );

if ( $endBlockNumber === false )
            {
                return false;
            }

if ( !$this->file->truncate ( $endBlockNumber + 1 ) )
            {
                throw new ezcArchiveException( "The archive cannot be truncated to " . ( $endBlockNumber + 1 ) . " block(s). " .
                                               "This happens with write-only files or stream (e.g. compress.zlib) " );
            }

$this->entriesRead = $fileNumber;
            $this->completed = true;
            $this->fileNumber = $originalFileNumber;

return $this->valid();
        }
    }

/**
     * Appends a file to the archive after the current entry.
     *
     * One or multiple files can be added directly after the current file.
     * The remaining entries after the current are removed from the archive!
     *
     * The $files can either be a string or an array of strings. Which, respectively, represents a
     * single file or multiple files.
     *
     * $prefix specifies the begin part of the $files path that should not be included in the archive.
     * The files in the archive are always stored relatively.
     *
     * Example:
     * <code>
     * $tar = ezcArchive( "/tmp/my_archive.tar", ezcArchive::TAR );
     *
     * // Append two files to the end of the archive.
     * $tar->seek( 0, SEEK_END );
     * $tar->appendToCurrent( array( "/home/rb/file1.txt", "/home/rb/file2.txt" ), "/home/rb/" );
     * </code>
     *
     * When multiple files are added to the archive at the same time, thus using an array, does not
     * necessarily produce the same archive as repeatively adding one file to the archive.
     * For example, the Tar archive format, can detect that files hardlink to each other and will store
     * it in a more efficient way.
     *
     * @throws ezcArchiveWriteException  if one of the files cannot be written to the archive.
     * @throws ezcFileReadException      if one of the files cannot be read from the local filesystem.
     * @throws ezcArchiveException       if the archive is closed.
     *
     * @param string|array(string) $files  Array or a single path to a file.
     * @param string $prefix               First part of the path used in $files.
     * @return bool
     */
    public function appendToCurrent( $files, $prefix )
    {
        if ( $this->file === null )
        {
            throw new ezcArchiveException( "The archive is closed" );
        }

if ( $this->file->getFileAccess() !== ezcArchiveFile::READ_WRITE )
        {
            throw new ezcArchiveException( "Cannot appendToCurrent when writing to a read-only, write-only stream (e.g. compress.zlib)." );
        }

if ( $this->file->getFileAccess() === ezcArchiveFile::READ_ONLY || !$this->algorithmCanWrite() )
        {
            throw new ezcBaseFilePermissionException( $this->file->getFileName(),  ezcBaseFilePermissionException::WRITE );
        }

$entries = $this->getEntries( $files, $prefix );
        $originalFileNumber = $this->fileNumber;

for ( $i = 0; $i < sizeof( $files ); $i++ )
        {
            // Changes the fileNumber
            $this->appendHeaderAndFileToCurrent( $entries[$i] );
        }

$this->fileNumber = $originalFileNumber;
        return $this->valid();
    }

/**
     * Append a file or directory to the end of the archive. Multiple files or directory can
     * be added to the archive when an array is used as input parameter.
     *
     * @see appendToCurrent()
     *
     * @throws ezcArchiveWriteException  if one of the files cannot be written to the archive.
     * @throws ezcFileReadException      if one of the files cannot be read from the local filesystem.
     * @throws ezcArchiveException       if the archive is closed.
     *
     * @param string|array(string) $files  Add the files and or directories to the archive.
     * @param string $prefix               First part of the path used in $files.
     * @return bool
     */
    public function append( $files, $prefix )
    {
        if ( $this->file === null )
        {
            throw new ezcArchiveException( "The archive is closed" );
        }

if ( $this->file->getFileAccess() === ezcArchiveFile::READ_ONLY || !$this->algorithmCanWrite() )
        {
            throw new ezcArchiveException( "Archive is read-only" );
        }

// Appending to an existing archive with a compressed stream does not work because we have to remove the NULL-blocks.
        if ( $this->hasNullBlocks && $this->file->getFileAccess() !== ezcArchiveFile::READ_WRITE )
        {
            throw new ezcArchiveException( "Cannot append to this archive" );
        }

// Existing files need to be read, because we don't know if it contains NULL-blocks at the end of the archive.
        if ( $this->file->getFileAccess() !== ezcArchiveFile::WRITE_ONLY )
        {
            $this->seek( 0, SEEK_END );
        }

// Do the same as in appendToCurrent(). But we know that it's possible.
        $entries = $this->getEntries( $files, $prefix );
        $originalFileNumber = $this->fileNumber;

for ( $i = 0; $i < sizeof( $files ); $i++ )
        {
            // Changes the fileNumber
            $this->appendHeaderAndFileToCurrent( $entries[$i] );
        }

$this->fileNumber = $originalFileNumber;
        return $this->valid();
     }

/**
     * Closes the archive correctly.
     */
    public function close()
    {
        if ( $this->file !== null )
        {
            $this->writeEnd();

$this->file->close();
            $this->file = null;
        }
    }

/**
     * Writes the end of the archive.
     *
     * @throws ezcArchiveException
     *         if the archive is closed
     */
    public function writeEnd()
    {
        if ( $this->file === null )
        {
            throw new ezcArchiveException( "The archive is closed" );
        }

if ( $this->file->isModified() )
        {
            if ( !$this->hasNullBlocks )
            {
                if ( $this->addedBlocksNotReliable )
                {
                    $this->appendNullBlocks();
                }
                else
                {
                    // Added Blocks  -  Added null blocks (Block factor 20)
                    // 0             -  0
                    // 1             - 19
                    // 19            - 1
                    // 20            - 0
                    // 21            - 19
                    $nullBlocks = ( $this->blockFactor - ( $this->addedBlocks % $this->blockFactor ) ) % $this->blockFactor;
                    $this->file->appendNullBlock( $nullBlocks );
                }

$this->hasNullBlocks = true;
                $this->addedBlocksNotReliable = false;
                $this->addedBlocks = 0;
            }
        }
    }

/**
     * Appends the given {@link ezcArchiveBlockFile} $file and {@link ezcArchiveEntry} $entry
     * to the archive file.
     *
     * The $entry will be used to create the correct header, whereas the $file contains the raw data
     * that should be append to the archive.
     *
     * @param ezcArchiveEntry $entry
     * @return bool
     */
    protected function appendHeaderAndFileToCurrent( $entry )
    {
        // Are we at a valid entry?
        if ( !$this->isEmpty() && !$this->valid() )
        {
            return false;
        }

if ( !$this->isEmpty() && $this->file->getFileAccess() !== ezcArchiveFile::WRITE_ONLY )
        {
            // Truncate the next file and don't add the null blocks.
            $this->truncate( $this->fileNumber + 1, false );
        }

if ( $this->entriesRead == 0 )
        {
            $this->fileNumber = 0;
        }
        else
        {
            $this->fileNumber++;
        }

// Add the new header to the file map.
        $this->headers[ $this->fileNumber ] = $this->createTarHeader();
        $this->headers[ $this->fileNumber ]->setHeaderFromArchiveEntry( $entry );

// Search the end of the block file, append encoded header, and search for the end-again.
        $this->file->seek( 0, SEEK_END );
        $this->headers[$this->fileNumber]->writeEncodedHeader( $this->file );

// Add the new blocknumber to the map.
        $this->headerPositions[$this->fileNumber] = $this->file->key();

// Append the file, if needed.
        $this->addedBlocks += 1;
        if ( $entry->getSize() > 0 )
        {
            $this->addedBlocks += $this->file->appendFile( $entry->getPath() );
        }

if ( !( $this->file->isNew() && $this->file->getFileAccess() === ezcArchiveFile::WRITE_ONLY ) )
        {
            $this->addedBlocksNotReliable = true;
        }

$this->hasNullBlocks = false;
        $this->completed = true;
        $this->entriesRead++;

$this->entries[$this->fileNumber] = $entry;
        return true;
    }

/**
     * Appends zero or more null blocks to the end of the archive, so that it matches the $blockFactor.
     *
     * If the archive has already the correct size, no null blocks will be appended. Otherwise as many
     * null blocks are appended (up to $blockFactor - 1) so that it matches the $blockFactor.
     *
     * @return void
     */
    protected function appendNullBlocks()
    {
        $last = 0;
        if ( $this->file->getLastBlockNumber() == -1 )
        {
            if ( !$this->file->valid() )
            {
                $this->file->rewind();
            }

while ( $this->file->valid() )
            {
                $last = $this->file->key();
                $this->file->next();
            }
        }
        else
        {
            $last = $this->file->getLastBlockNumber();
        }

$this->file->seek( $last );

// Go to the end.
        /*
         */

// echo ("Last block: " . $this->file->getLastBlockNumber() );

// Need a ftell in the seek.
        // $this->file->seek( 0, SEEK_END );

$blockNumber =  $last;

// 0  .. 19 => first block.
        // 20 .. 39 => second block.
        // e.g: 20 - ( 35 % 20 ) - 1 = 19 - 15 = 4
        $append = $this->blockFactor - ( $blockNumber % $this->blockFactor ) - 1;
        $this->file->appendNullBlock( $append );
    }
}
?>

Batal

⬅ Archive 5 item

Nama	Tipe	Ukuran	Diubah	Perm	Aksi
📁 headers	dir	—	15/09/24 19:20	0755	📂
🐘 gnu.php	php	2.5 KB	17/07/24 17:17	0644	✏️ ⬇
🐘 pax.php	php	2.4 KB	17/07/24 17:17	0644	✏️ ⬇
🐘 ustar.php	php	2.5 KB	17/07/24 17:17	0644	✏️ ⬇
🐘 v7.php	php	19.1 KB	17/07/24 17:17	0644	✏️ ⬇

✏️ Rename

🔑 Ubah Permission